Montaje y manipulación
Contacto
Series
M8.902

M8.902

Fixtures, clamping claws, holders and shelves
M8.902
Descargas
Hoja del catálogo
Instrucciones de servicio
Clamping devices
Bicycle clamping devices for Bike proStand

Version with rotation axis
High torques can occur with the Bike pro Stand with rotation axis. To absorb these torques, the universal fixture part no. 6352 919 must be screwed to the flange of the rotation axis, to which suitable clamping claws and holders in 3 variants can be attached.

Version without rotation axis
Clamping claws with a flange for direct mounting can be screwed onto the flange of the slide.
The universal fixture part no. 6352 919 can also be attached as a quick changing system.

Universal fixture

For Bike proStand with and without rotation axis. 
For fixing:
• Clamping claw VAR, part no. 6352 912
• Clamping claw Feedback, part no. 6352 927
• 3-point pick-up, part no. 6352 939
The universal fixture facilitates:
• The transmission of high torques so that e-bikes weighing up to 40 kg can be safely turned with the electric rotation axis.
 • The clamping claws and 3-point pick-up can be mounted at any angle, as the universal fixture can be rotated as required.
 • The clamping claws and 3-point pick-up can be changed quickly, as only one fixing screw needs to be tightened by the hand lever for fixing. 

Part no. 6352 919

Clamping claws and holders for universal fixture

Clamping claw “VAR”
High-quality design with additional retaining holes for reliable use with universal holder 6352919 on the electric rotation axis.

Part no. 6352 912

Clamping claw “Feedback”
Mounting clamp, re-engineered with index bore for universal fixture 6352 919.

Part no.  6352 927

3-point pick-up
with self-tensioning system for universal fixture 6352 919
The 3-point pick-ups accommodate bicycles with a wide variety of frame shapes on the assembly fixtures. Due to the large distances between the pick-up points, the forces at the support points are reduced and paint and sensitive materials are protected. Special attention was paid to edge and impact protection, a stable design and easy access.
The sliding guide enables the bicycle weight to press the mandrel forward, supporting the tensioning of the bicycle.
The pick-up is suitable for a bicycle weight of up to 25 kg.

Part no. 6352 939

Clamping claws with flange for direct mounting

Clamping claw „VAR“
with flange and locking for direct mounting on the Bike proStand without rotation axis.

Part no.  6352 925

Clamping claw „Park Tool“ 
with flange and locking for direct mounting on the Bike proStand without rotation axis.

Part no. 6401 154

Clamping claws for Bike proMobil

Mandrels
Mandrels are suitable for clamping bicycles without touching the paint. The mandrel also has a groove to route cables of the electric circuit or the cable of drop posts even when unclamped. Almost all frames can be picked up using adapter sleeves provided by the customer.  For  exotic  or  aeroprofiles, special shapes can be supplied on request.

Mandrel  Ø 27,2 mm 
Part no.  6314 178
 
Mandrel  Ø 30,9 mm 
Part no. 6314 489

Holders and shelves

for Bike basicLift | Bike proStand | Bike proMobil

Handlebar holder „Flop Stop“
with an adjusting range of 508 – 889 mm, the handlebar holder with its two rubber loops can be used as a universal helper for all assembly work. 

Part no.  6352 910

for Bike proStand

Tool holders 
with magnet pad for fixing
Holding force up to 2.5 kg
Dimensions: 145 × 90 × 50 mm

Part no.  6352 933

for Bike proStand

PC shelf
with suitable screws for attachment to the protection cover of the Bike proStand.
Recommendation: For laptops up to 14"

Part no.   6352 922

for Bike basicLift | Bike proStand

Container for magnetic pieces, stainless steel 
Suitable for magnetic fixing
- on the housing of the rotation axis of the Bike proStand 
- on the top plate of the Bike basicLift 
For holding metal objects such as screws, nuts, bolts, etc. 
Made of stainless steel, with two heavy-duty magnets and protective rubber on the bottom.
Dimensions: 237 × 28 × 136 mm

Part no.  6352 908

for Bike basicLift | Bike proStand

Container for magnetic pieces, vertical
Suitable for magnetic fixing
- on the magenta-coloured cover of the Bike proStand
- on the top plate of the Bike basicLift 

Colour: blue

Part no.  6352 928

Fixings

for Bike proStand

Wall and ceiling mounting set
Consisting of a crossbar aluminium profile, 
1 m or  2 m in length and a mounting set.
The set can be attached horizontally or vertically to the top plate of the Bike proStand. In this way, the crossbar can increase stability and at the same time can be used for cable routing and for hanging parts and tools.

1 m set  
Part no.  6352 923

2 m set  
Part no. 6352 924

for Bike proStand

Hook set
With T-nuts for hanging fatbikes.
Suitable for the wall and ceiling mounting set.

Part no.  6352 926

Adapter bracket
For direct attachment of many commercially available bicycle mounts and clamping claws to a standard ROEMHELD lifting column.
With corresponding screws for mounting

Part no.  6313 1072K

Artículos (17)
10
  • 10
  • 25
  • 50
Cargando…
tipo
Todos
  • Todos
  • 3-Punkt-Aufnahme (1)
  • soporte adaptador (1)
  • Haken-Set (1)
  • Lenkerhalter „Flop Stop“ (1)
  • Magnetschale, Edelstahl (1)
  • Magnetschale, blau (1)
  • PC-Ablage (1)
  • Spanndorn Ø 27,2 mm (1)
  • Spanndorn Ø 30,9 mm (1)
  • Spannklaue "Feedback" (1)
  • Spannklaue „Park Tool“ mit Flansch (1)
  • Spannklaue „VAR“ (1)
  • Spannklaue „VAR“ mit Flansch (1)
  • Universalaufnahme (1)
  • Wand- und Deckenbefestigungs-Set, 1 m (1)
  • Wand- und Deckenbefestigungs-Set, 2 m (1)
  • Werkzeughalter (1)
Referencia Datos CADtipo
Referencia
Datos CAD
/
tipo
soporte adaptador
Propiedades
Referencia
Datos CAD
/
tipo
Spanndorn Ø 27,2 mm
Propiedades
Referencia
Datos CAD
/
tipo
Spanndorn Ø 30,9 mm
Propiedades
Referencia
Datos CAD
/
tipo
Magnetschale, Edelstahl
Propiedades
Referencia
Datos CAD
/
tipo
Lenkerhalter „Flop Stop“
Propiedades
Referencia
Datos CAD
/
tipo
Spannklaue „VAR“
Propiedades
Referencia
Datos CAD
/
tipo
Universalaufnahme
Propiedades
Referencia
Datos CAD
/
tipo
PC-Ablage
Propiedades
Referencia
Datos CAD
/
tipo
Wand- und Deckenbefestigungs-Set, 1 m
Propiedades
Referencia
Datos CAD
/
tipo
Wand- und Deckenbefestigungs-Set, 2 m
Propiedades
Cargando…
Referencia
tipo
soporte adaptador
Referencia
tipo
Spanndorn Ø 27,2 mm
Referencia
tipo
Spanndorn Ø 30,9 mm
Referencia
tipo
Magnetschale, Edelstahl
Referencia
tipo
Lenkerhalter „Flop Stop“
Referencia
tipo
Spannklaue „VAR“
Referencia
tipo
Universalaufnahme
Referencia
tipo
PC-Ablage
Referencia
tipo
Wand- und Deckenbefestigungs-Set, 1 m
Referencia
tipo
Wand- und Deckenbefestigungs-Set, 2 m