Assembly and Handling
Contact
Series
B1.853

Swing Clamps with Sturdy Swing Mechanism

Top flange, position monitoring optional
double acting, max. operating pressure 350 bar
Swing Clamps with Sturdy Swing Mechanism
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B 1.853 Swing Clamps with Sturdy Swing Mechanism

Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.
Due to the sturdy swing mechanism and the manifold possibilities of position monitoring these swing clamps are particularly suited for

  • Automatic manufacturing systems
  • Clamping fixtures with workpiece loading via handling systems
  • Transfer lines
  • Test systems for motors, gears and axes
  • Assembly lines
  • Special machine tools

The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston. The favourable area ratio (piston/piston rod) allows high clamping forces already at relatively low oil pressures.
Due to the sturdy swing mechanism the angle position of the clamping arm remains the same after a slight collision with the workpiece during loading
or unloading. Also a collision during the clamping process is not critical.
When using high flow rates the swing speed is limited by installed throttle points. For connection via drilled channels, adjustable throttle valves can be screwed instead of the screw plugs. The FKM wiper at the piston rod can be protected against coarse and hot swarf by an optionally available metallic wiper.

Video
Accessories (51)
Item no. CAD data Description
Item no.
CAD data
Description
Pneumatic position monitoring for series 1843B0XX/1843M0XX and 1844B0XX/1844M0XX for swing angle 0° or 90° as per data sheet B1.853
Item no.
CAD data
Description
Pneumatic position monitoring for series 1843B0XX/1843M0XX and 1844B0XX/1844M0XX for swing angle 15° to 75° as per data sheet B1.853
Item no.
CAD data
Description
Pneumatic position monitoring for series 1845B0XX/1845M0XX for swing angle 0° or 90° as per data sheet B1.853
Item no.
CAD data
Description
Pneumatic position monitoring for series 1845B0XX/1845M0XX for swing angle 15° to 75° as per data sheet B1.853
Item no.
CAD data
Description
Electrical position monitoring for series 1845B0XX/1846B0XX/1847B0XX and 1845M0XX/1846M0XX/1847M0XX with switch and plug as per data sheet B1.853
Item no.
CAD data
Description
Pneumatic position monitoring for series 1846B0XX/1846M0XX for swing angle 0° or 90° as per data sheet B1.853
Item no.
CAD data
Description
Pneumatic position monitoring for series 1846B0XX/1846M0XX for swing angle 15° to 75° as per data sheet B1.853
Item no.
CAD data
Description
Electrical position monitoring for series 1845B0XX/1846B0XX/1847B0XX and 1845M0XX/1846M0XX/1847M0XX without switch and plug as per data sheet B1.853
Item no.
CAD data
Description
Pneumatic valve M12x1.5 10 mm stroke switching range 2 to 9 mm max. 10 bar, as per data sheet B1.853
Item no.
CAD data
Description
Pneumatic valve M12x1.5 10 mm stroke switching range 2 to 10 mm max. 10 bar, as per data sheet B1.853
Loading…