Assembly and Handling
Contact
Series
B1.853

Swing Clamps with Sturdy Swing Mechanism

Top flange, position monitoring optional
double acting, max. operating pressure 350 bar
Swing Clamps with Sturdy Swing Mechanism
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B 1.853 Swing Clamps with Sturdy Swing Mechanism

Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.
Due to the sturdy swing mechanism and the manifold possibilities of position monitoring these swing clamps are particularly suited for

  • Automatic manufacturing systems
  • Clamping fixtures with workpiece loading via handling systems
  • Transfer lines
  • Test systems for motors, gears and axes
  • Assembly lines
  • Special machine tools

The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston. The favourable area ratio (piston/piston rod) allows high clamping forces already at relatively low oil pressures.
Due to the sturdy swing mechanism the angle position of the clamping arm remains the same after a slight collision with the workpiece during loading
or unloading. Also a collision during the clamping process is not critical.
When using high flow rates the swing speed is limited by installed throttle points. For connection via drilled channels, adjustable throttle valves can be screwed instead of the screw plugs. The FKM wiper at the piston rod can be protected against coarse and hot swarf by an optionally available metallic wiper.

Video
Accessories (51)
Item no. CAD data Description
Item no.
CAD data
Description
Nut M28 x 1.5 mm as per data sheet B1.880
Item no.
CAD data
Description
Nut M35 x 1.5 mm as per data sheet B1.880
Item no.
CAD data
/
Description
Nut M14x1.5 as per data sheet B1.852
Item no.
CAD data
/
Description
Nut M20x1.5 as per data sheet B1.852
Item no.
CAD data
Description
Clamping arm without thread for series 1843 max. 350 bar, as per data sheet B1.852
Item no.
CAD data
Description
Clamping arm without thread for series 1844 max. 350 bar, as per data sheet B1.852
Item no.
CAD data
Description
Clamping arm without thread for series 1845 max. 350 bar, as per data sheet B1.852
Item no.
CAD data
Description
Clamping arm without thread for series 1846 max. 350 bar, as per data sheet B1.852
Item no.
CAD data
Description
Clamping arm without thread for series 1847 max. 350 bar, as per data sheet B1.853
Item no.
CAD data
Description
Flow control valve G1/8 as per data sheet B1.8500
Loading…